FM-Formula Mazda

RAIN LIGHT + BRACKET + HARDWARE FOR FORMULA MAZDA FM   FIA 8874-2019 Rain Light 2024 SCCA Rule Change (Effective 1/1/2024) A red taillight meeting FIA Standard 8874-2019, Technical List No. 76, is required on all Formula (open wheel) and Sports Racing cars. This light shall be mounted approximately on the centerline of the car.   Formula Mazda FM Rain Light Upgrade Kit (Light, Mounting Bracket + Hardware) is available for Pre-Order at a 10% discount. Insure that you will have the parts you need to be compliant in 2024.

Read more less

FM Front Wing Wicker - Right Side. New design as of 08/01/2024Wickers are now side specific. 

Read more less

FM Front Wing Wicker - Left Side. New design as of 08/01/2024Wickers are now side specific. 

Read more less

Introducing our new Steering Wheel Spacer! Get the steering wheel closer to the racecar driver with 1/2" increments.  Order the appropriate quantity and don't forget to specify your preferred overall dimension in the special Instructions Section of Order Checkout.  We will provide the perfect hardware kit for you. Take control and get up on the wheel!

Read more less

Take control of your racing adventures with our Logbook Pouch! Keep your Formula Mazda logbook secure and protected with the durable zippered pouch. No more worries about the elements ruining your logbook - take on any challenge with peace of mind. Logbook Not Included!

Read more less

Water Pump Pulley - Lightweight

Read more less

Starting in 2024 the existing FM Fire Suppression system (SPA Slimline and fire bottle will no longer available. Fire Bottles are still able to be reserviced!  If you need to replace your fire bottle you will need to replace the complete fire system.  *NOTE* ALL fire systems MUST ship via Ground, due to them being pressurized.Our fire systems are filled to order! This means it could take between 2-10 business days for your order to ship.  SPA Extreme Novec SFI 17.2 3lb Mechanical Fire Suppression System - SPAex SFI3 M SPA Extreme® line of SFI certified suppression systems has added a smaller, lighter, more affordable option to its arsenal.All Extreme systems use 3MTM NovecTM 1230 Fire Protection Fluid, a next generation halon replacement. This has zero ozone depletion and is non-toxic, so it's safe for the driver, unlike other Halon replacements. It's non-conductive, so it won't ruin electronics. And, there's no residue or clean up.Utilizing our multi-directional nozzles for the engine bay and the cockpit, gives this system impressive results in fire knockdown and fire out properties in record times.Kit Includes:1x Cockpit Nozzle2x Engine Bay Nozzles10x 5/16" Aluminum Tubing (per Foot)2x 5/16" T-fitting1x 5/16" Bulkhead fitting1x 6ft Pull Cable1x E-location sticker2x Bottle Mounts  

Read more less

FM - Reverse Idler Bearing (1) per Car

Read more less

FIA 2019 SPEC RAINLIGHT TERMINATED FOR FORMULA MAZDA FM Includes Pigtail for FM Connection. We also offer Rain Lights terminated for the Formula Mazda FMzR + Pro Formula Mazda The new generation of Rain Light is up to 3 times brighter than previous and Flashes at 4hz. Homologated to: FIA 8874-2019 Homologation No: RL.009.22 Size: 91.0 X 56.5 X 14.0mm Weight: 140g Brightness: 800CD (minimum) Mounting: 2 x M6 Studs Voltage: 11.3-15.6V Current Draw: 700mA Cable: 190mm Mil-Spec Flying lead (Type 55 22awg wire)

Read more less

FM Specific Rain Light Bracket - for upgraded Rectangular FIA 8874-2019 Rain Light required by SCCA starting 01/01/2024.  Includes: Hardware to Attached to Wing Mount Plates. This is specifically for the Formula Mazda FM.  We also offer similar bracket for the Pro Formula Mazda and the Formula Mazda FMzR.  

Read more less

RaceCar Application - FM

Read more less

FM Rear Shock - Double Adjustable - Penske *new in 08/2023 requires a 5" long spring

Read more less

FM Front Shock - Double Adjustable - Penske *new in 08/2023 requires a 4" long spring

Read more less

FM Front Spring | Hyperco Chassis Springs, 2.25" I.D. x 4" x 700 lb/in to be used with Penske Shock Update This is the recommended baseline spring for Formula Mazda with Penske Double Adjustable Shocks and Hoosier 35 B Compound Tires (43167)

Read more less

FM Rear Spring | Hyperco Chassis Springs, 2.25" I.D. x 5" x 600 lb/in to be used with Penske Shock Update This is the recommended baseline spring for Formula Mazda with Penske Double Adjustable Shocks and Hoosier 35 B Compound Tires (43313)

Read more less

RaceCar Application: FMzR + FM FM - this is the lightweight option to replace the original 060-129. Replacing all (4) CV Joints (060-717) and CV Boots (060-718) equals a 2.85 lb reduction in rotating mass. GKN Motorsport S10 aerodynamic Fast Boot, with a zinc passivated steel outer and heavy duty rubber inner aero boot. TO BE USED WITH: 060-717 CV Joint - Lightweight

Read more less

RaceCar Application: FMzR + FM FM - this is the lightweight option to replace the original 060-128. Replacing all (4) CVs and CV Boots (060-718) equals a 2.85 lb reduction in rotating mass. GKN Motorsport size 10 94mm lightweight CV joints. These plunging constant velocity joints feature a 94mm OD and and have been developed by GKN Motorsport to ensure easy rotational liner motion at for wheel or differential applications. With over 30 years of continuous development of GKN Driveline products, these GKN Motorsport plunging CV joints offer a significant weight reduction, cooler running temperatures and enhanced joint life through higher performance. TO BE USED WITH: 060-718 GKN CV Fast Boot

Read more less