Front Suspension
BBS Wheel O-Ring Gasket
This O-Ring is used between the wheel halves, to make an air tight seal. When replacing, it is suggested to also replace the BBS Bolt Kit [000-106] (not included). Application: Inner Rim Half for Standard Formula Mazda Material: - Placement: Universal - Right and Left, Front and Rear Quantity: 4 per car Dimensions: 1/8"x14-1/4" Weight: 3.4 ozs.
$41.00
BBS Wheel Rim Half - Front Outer
Does not come with Schraeder Valve [000-107] or BBS Bolt Kit [000-106]. Schraeder Valve and BBS Bolt Kit should be replaced when replacing this Outer Front Rim Half. Application: Outer Front Rim Half for Standard Formula Mazda Material: - Placement: Universal - Right and Left Quantity: 2 per car Dimensions: 2-3/4"x14-1/4" Weight: 2 lbs. 3 oz. wheel
$191.00
1/2 X 1/2 Camber Rod End
1/2 X 1/2 Camber Rod End
$79.00
7/16x7/16 RH Suspension Rod End + Jam Nut
7/16x7/16 RH Suspension Rod End + Jam Nut
$58.00
BBS Wheel Rim Half - Inner
This part is used for both Front and Rear Inner Half. Does not come with BBS Bolt Kit [000-106]. BBS Bolt Kit should be replaced when changing Inner Rim Half. Application: Inner Rim Half for Standard Formula Mazda Material: - Placement: Universal - Right and Left, Front and Rear Quantity: 4 per car Dimensions: 5-3/4"x14-1/4" Weight: 4.5 lbs.
$81.00 - $162.00
Penske FM Front Shock - Double Adjustable
FM Front Shock - Double Adjustable - Penske *new in 08/2023 requires a 4" long spring
$745.00
Hyperco FM Front Spring - for Penske Shock
FM Front Spring | Hyperco Chassis Springs, 2.25" I.D. x 4" x 700 lb/in to be used with Penske Shock Update This is the recommended baseline spring for Formula Mazda with Penske Double Adjustable Shocks and Hoosier 35 B Compound Tires (43167)
$94.00
Rocker Stud + Hardware Kit
Rocker Stud Bolt Kit - (1) bolt, (1) nut, (2) washers *replaces the Rocker Stud
$34.00
Front Upright Pin + Hardware Kit
Front Upright Pin + Hardware Kit Includes: (1) Front Upright Pin (1) Lower Pin Spacer (2)Part Specific Washers (2) Part Specific Nuts Upright Pin is universal right or left. This pin screws into the bottom of the Front Upright [000-108]. It is suggested to replace the Front Upright Pin, if damage occurs to the Front Upright. 2 required per car set. Approx Weight: 8.2 oz.
$105.00
Front Lower Control Arm
Original FM Control Arm - While Supplies Last.
$184.00 $165.00
Rod End + Nut - Control Arm Inner | Heavy Duty
**This is an update part and requires the following parts to be used with it. 000-118 Front Control Arm | HD or 020-110 Rear Control Arm | HD000-159 Camber Adjustment Sleeve | Heavy Duty000-160 Camber Nut | Heavy Duty120-126 Camber Rod End | Heavy Duty (1)
$88.00
Front Upright Hardware Kit
Front Upright Hardware Kit Kit Includes: (2) bolts (2) nuts (4) washers
$24.00
Camber Adjustment Sleeve - Heavy Duty
**This is an update part and requires the following parts with it.000-118 Front Control Arm | HD or 020-133 Rear Control Arm | HD000-160 Camber Nut | Heavy Duty120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Hime | Heavy Duty (2)
$66.00
Front Hub
Does Not Come With Wheel Pins Application: Standard Formula Mazda Material: - Placement: Universal - Right and Left Quantity: 2 per car Dimensions: 5-1/2" x 4-1/2" Weight: 3 lb. 4 oz.
$315.00
Front Upper Misalignment Spacer Kit - Steel
Kit Includes (2) Front Upper Misalignment Spacers - Steel This is the steel spacer that reduces the 5/8 Upper Camber Hime to 7/16. It is used in conjuction with the Aluminum Front Upper Misalignment Spacer [000-111A]. This spacer should be replaced if damage occurs to Front Upright, Rocker or 5/8 upper Camber Hime. Application: Standard Formula Mazda - This spacer should be replaced if damage occurs to Front Upright, Rocker, or 5/8 Upper Camber Hime. Material: Steel Placement: Universal - Right and Left Quantity: 2 per Front Upright, 4 per car Dimensions: - Weight: 0.8 oz.
$24.00
Front Upright
The Front Upright can be used on the right or left of the car. Application: Front Upright for Standard Formula Mazda Material: Aluminum Placement: Universal - Right and Left Quantity: 2 per car Dimensions: - Weight: 3 lb. 10 oz.
$414.00 - $551.00
Rod End - Camber - Heavy Duty
**This is an update part and requires the following parts to be used with it. 000-118 Front Control Arm | HD or 020-110 Rear Control Arm | HD000-159 Camber Adjustment Sleeve | Heavy Duty120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Rod End | Heavy Duty (2)
$131.00
Camber Nut - Heavy Duty
**This is an update part and requires the following parts to be used with it. 000-118 Front Control Arm | HD or 020-110 Rear Control Arm | HD000-159 Camber Adjustment Sleeve | Heavy Duty120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Hime | Heavy Duty (2)
$26.00
Tapered Spacer Kit - 7/16 (4 per)
Kit Includes: (4) 7/16 Tapered Spacers [000-121]
$20.00
Front Upper Comp. Spacer Kit - Aluminum
Kit Includes: (2) Front Upper Comp Spacers - Aluminum.This part is located in the Front Upright [000-108] to fill space for the Upper 5/8x5/8 RH Hime [120-100] Application: Standard Formula Mazda - This spacer should be replaced if damage occurs to Front Upright [000-108], Rocker Left Side [000-122], Rocker Right Side [000-124] or 5/8x5/8 RH Hime [120-100] Material: Aluminum - Anodized Black Placement: Universal - Right and Left Quantity: 2 per Front Upright, 4 per car Dimensions: - Weight: 0.6 oz. each
$22.00
Drive Pin + Nut Kit
Kit Includes: (1) Drive Pin [000-115] (1) Wheel Drive Pin Nut [000-116]
$13.00
Front Control Arm - Heavy Duty
000-118 : Front Control Arm | Heavy Duty**This is an updated part and requires the following parts with it. 000-159 Camber Sleeve | Heavy Duty (1)000-160 Camber Nut | Heavy Duty (1)120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Hime | Heavy Duty (2)
$207.00
Shock Bump Rubber-Short-25mm
RaceCar Application - FM
$13.00 - $26.00
Shock Bump Rubber-Tall-55mm
RaceCar Application - FM
$15.00 - $30.00
